Milwaukee 3017-20 - 18V 500 CFM Cordless Brushless Blower
The Milwaukee 3017-20 is a cordless handheld leaf blower delivering up to 500 CFM and 120 MPH. It is powered by an 18V M18™ battery. (Read full specs)
Page Content
Description
The lightweight, balanced design and ambidextrous variable speed sliding lock on the lever provides users with more clearing control.
Zoom on the Milwaukee 3017-20
With its cordless handheld design, the Milwaukee 3017-20 is mostly aimed at homeowners with home properties that are not too small or too large, often in the quarter- to half-acre range.
It is capable of expelling a maximum air volume of 500 cubic feet per minute (CFM). Its air speed is rated at 120 MPH. To put it simply, it handles a limited amount of leaves and debris on a small lawn or garden area, suitable for light, occasional clearing.
Featuring an 18V brushless motor, the unit provides cordless operation, allowing you to operate with great mobility. This is a bare tool unit, meaning no battery comes with it. Its operation needs an 18V M18™ battery. According to Milwaukee, using the M18™ REDLITHIUM™ FORGE™ HD12.0 battery should allow the blower to run for up to 30 minutes on a full charge.
For those who wish to have complete control while operating their leaf blower, the 3017-20 offers variable speed settings, and moreover, is also equipped with cruise control, which allows the user to comfortably continue blowing at their preferred setting.
With a weight of 5.4 lbs, this handheld unit enables one-handed use in tighter areas. When using a M18™ REDLITHIUM™ FORGE™ HD12.0 battery, the total weight of the blower reaches around 8.7 lbs.
Product Videos
The Milwaukee 3017-20's performance versus other blowers
The following charts are provided to give you an idea how the key specs of the Milwaukee 3017-20 compare with handheld leaf blowers of similar voltage (between 18 and 24V).
- Among other cordless handheld blowers in the 18 to 24V range, the Milwaukee 3017-20 has a typical weight of 5.4 lbs. Should weight be a deciding factor, the Worx WG543 is worth a look at just 2.3 lbs the bare tool.
- Air exiting this blower's nozzle can reach speeds of 120 MPH, marking it as considerably swifter than most battery-operated handheld blowers between 18 and 24V. If you wish to benefit from air expelled at the fastest possible speed, the Makita XBU07SM1 and its 143 MPH could be an option to consider.
- With an airflow rating of 500 CFM (cubic feet per minute), the 3017-20 is unquestionably on the high end among cordless handheld blowers with a comparable voltage. If air volume is important to you, the Dewalt DCBL724W1, with 550 CFM, could be in your good books.
- The 3017-20 is within the average range for cordless handheld units that operate between 18 and 24V, offering up to 30 minutes of running time when fully charged. If autonomy is an important factor for you, the Ryobi PBLLB01K can run for up to 60 minutes and could be worth considering.
- Runtime alone doesn’t always tell the full story because it depends heavily on battery capacity. Runtime efficiency can give a clearer picture by showing how much work you get per unit of battery power. With its current setup, the Milwaukee 3017-20 offers a lower level of runtime efficiency compared to the other compared battery-powered handheld models. If you are focused on getting more use per charge, the Sun Joe 24V-JB-LTE offers the highest runtime efficiency, at 1.04 minutes per Wh.
Here's a list of the most popular specific comparisons:
Price comparison
As you can see from these interactive charts, when compared to other 18-24V cordless blowers, the Milwaukee 3017-20 is on the average side of the price range.
Therefore, this blower nicely fits in the expected budget for this kind of product.
The bottom line
- In the expected price range
- Brushless motor
- Cruise control
- High CFM (500 CFM)
- High MPH (120 MPH)
- Decent bare tool weight (5.4 lbs)
- Good autonomy (30 mins)
- Low power efficiency
Features and Specifications
| Type | Cordless |
|---|---|
| Handling | Handheld |
| Air volume | Up to 500 CFM |
| Air speed | Up to 120 MPH |
| Blowing force | Up to 12.2 N |
| Motor type | Brushless |
|---|---|
| Battery system | 18V M18™ |
| Battery capacity | 12.0Ah (216Wh) |
| Autonomy | 30 mins |
| Speed settings | Variable |
| Battery included | 0 |
|---|---|
| Cruise control | Yes |
| Noise rating | 54 dB |
| Weight (tool only) | 5.4 lbs |
|---|---|
| Warranty | 3 years |
| UPC | 045242823963 |
We've taken extra care to research and verify each of the specifications above. That said, occasional mistakes or omissions are still possible. If you spot any missing or inaccurate information, feel free to suggest a correction so we can address it. For full technical details on the Milwaukee 3017-20, the user manual is available here (opens in a new tab).
About Milwaukee
The Milwaukee Electric Tool Corporation was first established in 1924 by A. F. Seibert in Milwaukee, Wisconsin USA. Since then, Milwaukee has become one of the most popular names in power tools for contractors and do-it-yourselfers. In 2005, the company was acquired by Techtronic Industries. Milwaukee continues to produce high-quality power tools, both corded-electric and powerful battery-operated systems. These include outdoor power equipment, such as leaf blowers, chainsaws, hedge trimmers, sprayers, and string trimmers. Milwaukee Tool is based in the USA, and maintains manufacturing plants at home, as well as in Europe and China.
Warranty Information
The Milwaukee 3017-20 is covered under a warranty for up to 3 years. This warranty may not cover all parts of the blower.
For more information about the warranty of Milwaukee blowers, please consult Milwaukee's warranty policies (opens in a new tab). Alternatively, you can also contact their Customer Support: 1-800-SAWDUST (729-3878).
Questions & Answers
There are no questions yet. Ask the first question.


